Raw wood look.
L.Co’s Invisible Oil was developed for lighter colored woods to preserve the natural color without enhancing its tone. L.Co’s Invisible Oil offers protection and durability without the ‘wet look’ leaving you with a bare, raw wood aesthetic.
Product Uses
For use on lighter colored interior wood surfaces including floors, windows, doors, cabinetry, woodwork, tables, furniture, bar tops, picture frames and various woodworking projects.
Product Details
Description:
L.Co’s Invisible Oil uses the same fast drying and durable parquet flooring resins that are in our original Interior Oil which provides excellent abrasion resistance and chemical resistance for high traffic/ high wear interior projects such as chairs, table-top surfaces, flooring, wooden staircases and kitchen and bathroom cabinets. L.Co Invisible Oil is specially formulated to create the effect of a natural, untreated, raw wood surface.
New wood application:
Prepare the surface of the wood by sanding with 400 grit sandpaper. Mix product well before and during application and apply with a soft cotton rag, foam brush, or roller in light coats. Allow surface to dry 2-4 hours before applying additional coats. Lightly sand with 400 grit sandpaper between coats. Seal with Topcoat for interior or Exterior Oil for exterior.
Repair | Maintenance:
Prepare the surface by cleaning with mineral spirits or turpentine, lightly sand with 400 grit sandpaper and re-coat referring to the instructions above.
Clean up:
Clean application tools immediately with mineral spirits or turpentine. Properly dispose of rags, applicators and waste.
Ingredients:
Uniquely formulated with pure tung oil, refined linseed oil, isoparaffin, pigment, modified waxes, modified alkyd resin, safe drying agents, UV absorbers and light inhibitors.
Non-toxic when fully cured.
Product Support
Completely safe. Completely sound.
At L.Co we take great care to ensure the safety of all of our products. We pledge that every product we make, and every product we will ever make, will meet the safety demands of health-conscious consumers. We guarantee that all of our products meet US Federal Drug Administration (FDA) requirements for the use of our coatings on food contact surfaces.
Natural plant oils.
Organic earth pigments.
Lead free drying agents.
Non-toxic.
Safe for children’s toys and furniture.
Safe for food contact.
3rd party testing.
L.Co products meet or exceed the standards for wood coatings specified by the US FDA, EU REACH, the migration of elements required by the European Standard “Safety of Toys” EN 71 Part 3: 2013+A1:2014, Canada’s Consumer Product Safety Directorate (CPSD), and the US Consumer Product Safety Improvement Act (CPSIA). These detailed reports are made available to all of our customers on our website: http://lco-usa.com/support/
Eco-Friendly.
L.Co uses all natural plant based oils and organic earth pigments from sustainable resources in our products. This means you can feel better about what you are putting on your projects. L.Co proudly works directly with local farmers to sustainably grow, ethically harvest, and cold-press our raw tung oil that is used in every one of our products.